
Pneumatic large meat quantitative sausage filling machine is a quantitative sausage filling machine newly developed by our company. Compared with the traditional sausage filling machine, its remarkable feature is that it can be filled with large meat, and can fill large meat with a size of 46 X 46 X 46 mm chunks without destroying the tissue of the meat. The double-rod cylinder is used for accurate quantification, and the error of meat paste is plus -2 grams. As the filling meat increases, the error will also increase. The sausage enema machine has very little meat, and it is equipped with a cleaning switch, which is very convenient to clean. The inner wall of the cylinder is mirror-finished and sealed with two imported O-rings. The sealing performance is good, and the durability is 10 times higher than the traditional technology. Welcomed by the majority of customers.
- The quantitative part is mainly composed of quantitative guide rod, fine-tuning nut, positioning bumper and positioning screw. It is mainly to adjust the quantitative amount, and adjust it as needed.
- The feeding part is mainly composed of hopper, quantitative cylinder, piston rod, piston, sealing ring, flange and so on. The power of feeding is the air source from the main cylinder, and the main cylinder drives the piston rod to control the feeding. The location of the master cylinder is at the lower rear of the sauage making machine (there is only one cylinder at the rear). The air source power from the auxiliary cylinder is used to control the rotary arm, the rotary arm drives the rotary valve, and the rotation of the rotary valve controls the discharge.


1. Voltage: 220V Frequency: 50HZ
2. Working air pressure: 0.5MPa
3. Quantitative range: 10g-500g
4. Apply for: minced meat plus -2 grams, large pieces of meat
5. Filling times: 30 times/min (variable)
Suositut Tagit:








